HOW TO : Linksys SRX200 + Emule

Quick guide to configure your Linksys SRX200 router/switch to support emule.

  1. Assign a static IP address in the range assigned to you by the wireless router. In this case, Linksys assigns the 192.168.1.0/24 range. I will use 192.168.1.50 as an example.
  2. Open a browser window and go to http://192.168.1.1
  3. Log in with your admin credentials (it is admin/admin by default).
  4. Click on the “Application and Gaming” tab.
  5. Make sure that you are on the “Port Range Forward” page.
  6. Enter the following information
  7.    Application : Emule
       Start : 4660
       End : 4712
       Type : Both
       IP Address : 50
       Enable : Checked

  8. Click on “Save Settings”
  9. Launch Emule and you should be in business 🙂